Top 10 Steps to Test a Fire Alarm System
A fire alarm system is a series of devices working together to detect fire, smoke, or carbon monoxide and alert or warn the people through audio and visual appliances. In the fire alarm system, smoke detectors and heat detectors are installed, so it can detect any chances of fire incidents before they can happen. So in California, the fire alarm system is an extremely important component of the protection measures for our home. But you need to test the fire alarms within a certain interval so any unwanted fire incident can be prevented.
How can you test your fire alarm system?
As we have mentioned the fire alarms and sensors need to be tested with a certain interval. Now we can see the fire alarms in all the buildings that consist of domestic and commercial. In both types of buildings, functions of the fire alarms system are the same but the operating method is partially different. So here we will emphasize the fire alarm testing service in California in the following section.
The testing method for commercial fire alarm systems.
Notify the fire department: The local fire department has a direct connection with many commercial fire alarm systems to get notification of fire as soon as the incident happens. Here the alarm directly sends the signal to the fire department, but if your commercial fire alarm is not connected with the fire department directly then you should call them immediately after the incident happened.
Activate your fire alarm system: If your fire alarm systems can be activated directly from the control panel then you can activate the fire alarms from there easily and you need to press the test button as directed in the manual. For other systems, you need to open the alarm lever box with the master key and then activate the alarm manually and press the test button.
Test all the alarms: You need to check all the fire alarm installed in the commercial building by checking them one by one. Also, you need to check if the sound is loud and clear.
Reset the fire alarm systems: The fire alarm systems need to be reset from time to time, so that can be rectified if they are wrongly silenced or changed in any other program. But before that, you should consult with your senior security staff and the fire department if necessary. Alternatively, you may consult the fire alarm repairing service in California for professional assistance.
Record the testing results in a journal: Keep the track of testing each and every fire alarms date by date. So if anybody else needs to perform the job, he or she can get easily an idea of how to do it properly.
Testing method for a domestic alarm system.
Test the smoke detectors: For domestic fire alarm systems, the process is less complicated; you need to test your fire sensor or smoke detector along with the other parts for testing your fire alarms. The smoke detectors usually look like small white dishes with an indicating light on or on the side of it. We usually place smoke detectors on the ceilings or high on the wall, so you need to climb there to check the smoke detectors.
Press the test button on the smoke detectors: By pressing the test button you can understand the status of the batteries and any other servicing requirements. Alternatively, you may contact the fire alarm sound systems service in California to perform the alarm testing professionally.
Check the fire sensor: You need to hold some cigarette smoke or a lit match close to the fire sensors to check if it is operating perfectly or not. If the alarm turns on then you should understand that your fire alarms are working properly.
Check the particle sensor: You need to find a can of spray aerosol labeled as ‘Smoke Test’ and spray the same close to the smoke or particle detectors.
Reset your alarm within a regular interval: Same as for the commercial alarms you need to reset your domestic fire alarms after it’s been tested or with a regular interval, so that ensure your alarm function properly before an incident could happen.
Final thoughts:
The fire alarm is a life-saving tool, so you should always check its status properly and if you think that you are not fit for such a job, you should immediately contact the best fire alarm systems service in California for expert assistance. As we have mentioned herein you can easily test your fire alarms without any assistance but you shouldn’t forget to check it after a certain period.
Comments
Post a Comment