How can you select the right fire sprinkler system?

Fire Systems: Alarm Monitoring | LinkedIn



The automatic fire sprinkler systems are widely regarded due to the protection it assures. We know from the recent ‘Winters fire’ incident in Yolo County, Northern California how a fire can devastate our properties as well as snatch the lives. So as we know ‘prevention is better than cure’, we should install a fire protection system in our homes to save our families from any such incident. Now for any fire incident the first you get alerted the better you can protect yourselves. The best fire alarm systems service in California always assures the utmost protection from any mishap from fire.


About the Automatic Sprinklers:


The automatic fire sprinklers usually contain a thermal operating element and for that purpose fusible links or glass bulbs are used as a sensor to detect any fire incident form the change in temperature. Once the temperature reaches a certain level it automatically activates and discharges the contents of the sprinkler piping. Now there are several types of fire sprinkler systems you can find in the place for fire alarm repair service in California, which can contain water as well as pressurized gases.


Types of Fire Sprinkler Systems:


Now the designs of the fire protection systems are made by the professional design team for the automatic sprinkler systems and the fire alarm systems in California. Here in the following section, we will emphasize on the different types of fire sprinkler systems, according to their type as well as their design approach. If you don’t have any fire protection system then this will help you before considering the right automatic fire sprinkler system for your house.


  • Wet pipe sprinkler system: This is a typical automatic sprinkler system, in which pipes filled with water are installed in the roofs and sensitive areas from fire. The stored water in the pipes discharged immediately once the sprinkler activates. However, their installation is not permitted as well as you shouldn’t install a wet pipe sprinkler system in a place under the temperature of 40°F, as the system will not work under such a climatic condition. But it can be installed in the climate-controlled buildings. Also, by insulation and heat trace system you can protect your pipes from freezing. You can contact the fire alarm testing service in California to check the condition of your fire alarm along with the wet pipe sprinklers.


  • Dry pipe sprinkler system: In this system, the pipes are filled with pressurized air or nitrogen, almost the same as the earlier. But here compressed air or nitrogen is used in place of water. This system is typically used in such places, which are under 40°F. So where the wet pipes cannot function the dry pipe sprinkler system is used to provide protection from any mishap caused by fire. The dry pipe system also requires some additional components, which include a dry pipe valve, air compressor, and pressure monitoring switch. These factors also increase the maintenance cost for a dry pipe system.


  • Deluge fire sprinkler system: This sprinkler system is used in such places which are considered as high hazard areas. For example in chemical processing or storage facilities, aircraft hangars, power plants Deluge fire sprinkler system is used. This has no automatic sensors and has to be operated manually. Also, this fire protection system can be installed in any condition and assures the full protection from fire incidents once activated. 


The Bottom Line:


These are the most popular fire sprinkler systems; also there are some other types that are available, but not widely used. Now if you have one in your home or office then you should check your fire sprinkler, as well as the fire alarm system, is working properly or not from time to time. This is the utmost important factor for the safety of you as well as your family, workers, and property. Now if you have enough knowledge on the fire protection system then you can check it by yourself of you can contact the professional fire alarm sound systems service in California and they will check and ensure both the systems are functioning properly.
Location: United States

Comments

Post a Comment

Popular posts from this blog

How to soak test a fire alarm system?

Image
  The performance of a system with a typical production load like a fire protection service needs to be checked under different circumstances. For that purpose detailed testing by manipulating the load over specific periods of time is needed to understand the behavior of the same under production use or excessive pressure. Soak test is done by the professional and reputed  fire alarm monitoring companies in California  for that purpose.  Soak test on a fire alarm system: The professional service providers soak tests the fire alarms to ensure their activeness at any point in time. They are trained and experts in this field and they test the smoke alarms by using a small amount of radioactive material between two electrically charged plates that ionize the air and cause electricity to flow between the plates. Then they send some smoke in the chamber to see if it is reducing the flow of current by disrupting the flow of ions, which activates the fire alarm. The expert technicians at the p
Read more

Do fire alarms have to be tested frequently?

Image
  Before discussing the maintenance schedules of fire alarms first, we should focus on what is a fire alarm and why this is very essential for our safety and security.   A fire alarm system is a series of electronic devices working together to detect fire situation and alert the inhabitants about upcoming danger. The fire alarms use heat, smoke, or carbon monoxide sensors to detect a fire in an early stage. After swift detection, the fire alarms alert or warn the people through audio and visual appliances.  So the fire alarm should be checked regularly to ensure its functionality especially in time of need and that may arise at any point in time. The reputed  fire alarm monitoring companies in California  advises monthly check-up of the fire protection systems to avoid any unwanted situation.  USFA guidelines for fire alarm system checking: As per the United States Fire Administration (USFA), the household fire alarms should be checked at least once a month. They also suggest replacing
Read more

Know the different types of fire alarms to choose the right one for your premises

Image
  Choosing the right type of fire alarms is important to ensure the safety from an unfortunate fire incident. But before further discussion regarding the different types of fire alarm systems you should know the functions of the fire alarm systems, so while choosing fire alarms you can make the right decision. The installed smoke detectors, heat detectors help to identify an indication of fire and activate the fire alarms accordingly.  The different types of fire alarm systems: Primarily there are three different types of fire alarm monitoring systems offered by the professional  fire alarm monitoring companies in California . Those are 1. ionization, 2. photoelectric, and 3. combination alarms and in the following section we will discuss each type of fire alarm along with their functions.  Ionization fire alarm: This is the most popular type of fire-smoke alarms in which a small amount of radioactive material is placed between two electrically charged plates. This ionizes the air and
Read more