6 most common mistakes while installing a fire sprinkler System



The ‘Winters fire’ incident in Yolo County, Northern California in recent times taught us how a fire can devastate our properties as well as snatch thousands of lives. So it is of utmost importance to install a fire protection system in our homes as we know ‘prevention is better than cure’. The automatic fire sprinklers can stop a fire at an early stage and eliminate any further chance of spreading the fire. 


  • The common mistakes while installing the fire sprinklers:


Before discussing the installation methods, first, we need to know how the fire sprinkler systems work. The automatic fire sprinklers contain a thermal operating element along with fusible links or glass bulbs to detect any probability of fire incident from the change in temperature. If the temperature of the surrounding place reaches a certain level it automatically activates and discharges the contents of the fire sprinklers.  


So the fire sprinklers are dependent upon several types of heat, smoke, and other sensors and that makes the installation process quite delicate. In the following section, we will mention the six most common installation mistakes for fire sprinkler systems as guided by a reputed fire sprinkler systems service in California.



  1. Not following the fire safety codes:


The fire safety codes are designed for the proper direction while choosing the types of equipment for fire protection service. The local fire safety rules and OSHA codes need to be followed properly while designing and installing fire safety devices. The professional fire alarm monitoring companies in California always fulfills all the safety measures while installing a fire protection system. 



  1. Fire sprinklers are too close to the ceiling:


The fire sprinklers are capable of sprinkling forced water or any other material within a certain space. Now if the sprinkler's heads or nozzles are placed too close to the ceiling or walls, then it couldn’t sprinkle within the expected area. So if the fire sprinklers are wrongly installed then these couldn’t serve the actual purpose and will act uselessly in time of actual need. 



  1. Blockage in the channels or nozzles:


In many cases, the pipes or the sprinkler nozzles get blocked during the construction work. So once everything is finished it is needed to check whether there are any blockages in the sprinkler channels. If the pipes or the nozzles are blocked anywhere then it will stop the material from spreading to the fire-affected area and the purpose of installing an automatic sprinkler will go in vain. 



  1. Placing the sprinklers in an obstructed place:


The points for installing the fire sprinklers should be determined with proper planning else, the fire sprinklers can’t provide safety from an unfortunate fire incident. In California, fire alarm systems and sprinkler systems are installed and services by a professional and certified technician, so while installing fire sprinkles it is better to contact a professional service provider to get the best performance. 



  1. Not testing the sprinklers after installation:


This can be called the most causal installation mistake. The technicians installing the fire sprinklers should check whether all the sensors and sprinklers are properly functioning or not. If they failed to check then there may be a little connection fault or blockage in the pipes of nozzles left unattended and that will make the whole system useless. 



  1. Finally, not obeying the user manual:


The user manual provided with the fire sprinkler systems has the direction for the installation procedure. So the persons installing the same should know how this particular fire sprinkler system works and for that purpose, following the user manual is needed. It is always better to study before doing any work and in this case, it could be a lifesaver.



So, we have understood the fire sprinkles should be installed in the proper way else in a time of a devastating fire incident these fire-protecting smart devices will fail to work. To avoid any such situation, we will advise you to contact and engage a reputed fire sprinkler systems service in California to ensure the best service and utmost protection from any unfortunate fire accident. 


Comments

Popular posts from this blog

How to soak test a fire alarm system?

Do fire alarms have to be tested frequently?

Know the different types of fire alarms to choose the right one for your premises