5 Types of Standpipe Systems
If you are using fire protection tools for your property, then you must have heard of standpipes. These standpipe systems are a series of pipes that link a water supply to a hose connection. It is usually an addition to the fire hydrant system. These innovative systems have been developed to offer a pre-piped water system for the occupants of any building or fire officials. Standpipe systems are conceptualized and crafted in such a way that they can provide fire protection water for hose lines in deliberately installed locations within any structure or a building.
When it comes to any kind of smoke management system, a few older buildings exclusively feature standpipe systems. On the contrary, a lot of newly erected buildings will feature a combination system, developed to supply the fire sprinkler system and the standpipe system. They are quite common among the large floor area buildings, where the lion’s share of the facility may be a few distances from an outside entrance, and in big multistoried buildings for preventing long lengths of hose among the stairwells as well as on the ground.
Coming to their different categories, standpipe systems for fire protection services are classified into five different kinds. These types vary from the three standpipe classes with which professional fire protection experts are quite accustomed, and are illustrations of the operating modes.
The different types of standpipe systems are as follows-
Automatic–Dry
This type of standpipe system is linked to a constant water supply that has the potential to meet the requirements of the flow and pressure. It is stuffed with air under pressure. It employs a valve, that is like a dry pipe sprinkler valve. It discharges water into the standpipe system if a hose station outlet is opened.
Automatic–Wet
This type of standpipe system is linked to a continuous water supply that has the eligibility to meet the requirements of the flow and pressure. It is permanently full of water at any point in time.
Semi-automatic–Dry
This type of standpipe system is linked to a continuous water supply eligible to meet the requirements of the flow and pressure. It utilizes a valve, which is almost like a deluge valve. It generates water into the standpipe system if a remote operating device is being operated.
Manual–Dry
This type of standpipe system is not linked with any constant water supply. The fire department attaches to a hydrant and caters to the system.
Manual–Wet
This type of standpipe system is also not linked with any constant water supply. The fire department attaches to a hydrant and caters to the system. The standpipe is stuffed inside with priming water for minimizing the time it consumes to distribute water for the hose station outlets.
Inference
Now, you might be wondering as to what type of standpipe system will be the most appropriate for you. What we suggest is that you leave everything to the best fire alarm service in California. They will guide you in the best possible way. If you wish to avail of any extra information, refer to NFPA (National Fire Protection Association) 14, Standard for the Installation of Standpipe and Hose Systems
Comments
Post a Comment