7 Successful Tips to Ensure Your Protection by Building Sprinkler System

                                                               

Whenever you find that the building you reside in has unfortunately caught some kind of fire today, you would expect that your sprinkler system will trigger off and regulate the fire to extinguish it completely.  The provider of your fire sprinkler systems service in California or elsewhere will ensure that all the time your sprinkler system will perform what it is supposed to do. 95% of the time, it does so. However, many things can be done by you in your capacity to enhance your chances even more.  

 

In this article, we have identified the seven tips that a building owner can do once the fire alarm systems in Glendora or other locations alert everyone. The main purpose of this write-up is to ensure their investment isn’t gutted in flames. 

 

Sprinkler System Design and Maintenance 

 

  1. When you are the landlord, then you must get in touch with your sprinkler contractor if there is any switch in tenants. The sprinkler contractor will assess your system to ensure that it's properly designed to meet the requirements of your new tenant. Sprinkler systems aren’t designed for all categories of tenants. Say, you may have originally planned your building as office space. Once a plastic injection molding company rents the space, and the sprinkler system was not planned for the plastics to be used and stored in that location, then the sprinkler system will fail to provide sufficient protection if there is a fire. 

 

  1. Every year, sprinkler systems have to be assessed by a qualified contractor. This annual process comprises inspection and maintenance of the sprinkler heads, valves, riser pipe, fire pump (when you have one), as well as the main drain test. Once your sprinkler system comprises an anti-freeze loop or dry pipe valve, then these also have to be checked yearly. 

 

  1. Every five years, a qualified contractor should be hired to internally assess to confirm that there are no foreign materials within your sprinkler system piping or system blockages that would resist the system from functioning if required. It has to be checked whether fire sprinklers repair is needed. Many items can prevent your sprinkler from activating, such as rust, sludge, and rocks. 

 

  1. Maintain at least 18 inches of clearance beneath all sprinkler heads. This will let the water being discharged reach the fire and keep it in check until the arrival of the fire department. 

 

  1. Get in touch with your sprinkler contractor whenever you find a sprinkler head is damaged. Damaged sprinklers may not activate when they have to, or activate at an inaccurate time, which may lead to a huge volume of water damage. 

 

  1. Conduct quarterly checks to ensure that the caps are on the water intake connections, called the Fire Department Connections, on the outside of your building. If there’s any unprecedented fire, this is where the fire department will hook inside your building to facilitate your sprinkler system and supply water to your standpipe system, when you possess one. Additionally, you must ensure that the area around the Fire Department Connection is visible, clear of debris, and easily accessible. Over time the caps may be damaged or stolen. Missing caps may compel organic or inorganic materials to infiltrate your sprinkler system. They can also be vandalized with debris intentionally placed inside the connection. 

 

  1. You may even opt for a monthly churn test for fire pumps. Work with your sprinkler system contractor to figure out the limitations and inspection requirements of your system. 

 

Inference 

 

Fires may occur for various reasons, a few of which may be beyond your control.  But, a properly maintained and designed system from a provider of fire sprinklers systems service in Glendora, or elsewhere is almost definite to contain the fire if the need arises. 


The standard protocols covering the design, installation, and servicing of building sprinkler systems can be found on the National Fire Protection Association (NFPA) website.  

Location: United States

Comments

Post a Comment

Popular posts from this blog

How to soak test a fire alarm system?

Image
  The performance of a system with a typical production load like a fire protection service needs to be checked under different circumstances. For that purpose detailed testing by manipulating the load over specific periods of time is needed to understand the behavior of the same under production use or excessive pressure. Soak test is done by the professional and reputed  fire alarm monitoring companies in California  for that purpose.  Soak test on a fire alarm system: The professional service providers soak tests the fire alarms to ensure their activeness at any point in time. They are trained and experts in this field and they test the smoke alarms by using a small amount of radioactive material between two electrically charged plates that ionize the air and cause electricity to flow between the plates. Then they send some smoke in the chamber to see if it is reducing the flow of current by disrupting the flow of ions, which activates the fire alarm. The expert technicians at the p
Read more

Do fire alarms have to be tested frequently?

Image
  Before discussing the maintenance schedules of fire alarms first, we should focus on what is a fire alarm and why this is very essential for our safety and security.   A fire alarm system is a series of electronic devices working together to detect fire situation and alert the inhabitants about upcoming danger. The fire alarms use heat, smoke, or carbon monoxide sensors to detect a fire in an early stage. After swift detection, the fire alarms alert or warn the people through audio and visual appliances.  So the fire alarm should be checked regularly to ensure its functionality especially in time of need and that may arise at any point in time. The reputed  fire alarm monitoring companies in California  advises monthly check-up of the fire protection systems to avoid any unwanted situation.  USFA guidelines for fire alarm system checking: As per the United States Fire Administration (USFA), the household fire alarms should be checked at least once a month. They also suggest replacing
Read more

Know the different types of fire alarms to choose the right one for your premises

Image
  Choosing the right type of fire alarms is important to ensure the safety from an unfortunate fire incident. But before further discussion regarding the different types of fire alarm systems you should know the functions of the fire alarm systems, so while choosing fire alarms you can make the right decision. The installed smoke detectors, heat detectors help to identify an indication of fire and activate the fire alarms accordingly.  The different types of fire alarm systems: Primarily there are three different types of fire alarm monitoring systems offered by the professional  fire alarm monitoring companies in California . Those are 1. ionization, 2. photoelectric, and 3. combination alarms and in the following section we will discuss each type of fire alarm along with their functions.  Ionization fire alarm: This is the most popular type of fire-smoke alarms in which a small amount of radioactive material is placed between two electrically charged plates. This ionizes the air and
Read more